4-Hole Bathtub Faucet, SquareI had to replace a defective tub rim faucet and didn't necessarily want to spend €1,000. Of course, it was important that I could replace the faucet 1:1 without major modifications. I will briefly summarise my experiences here. + Very good telephone consultation from the company Paul Gurkes / Mr Manusch + The faucet comes very well packaged, all parts in bags and additionally protected with bubble wrap. + After installation, there are actually no complaints - There is no CoC (Certificate of Conformity) that confirms the faucet meets all German regulations. The installer I trust (for 20 years) already had concerns. - The labelling on the diverter is meaningless because it is wrong! - From the diverter, the connections go off in all sorts of directions, which means that the installation plate with the faucets is extremely difficult to install. Very big problem. Why don't the hose connections all go downwards, which would make installation significantly easier. - A dimension drawing is missing, which in our case led to the diverter hitting the spout. Or you have to install it so that the end positions are at 45° each. But that doesn't look particularly good, of course. A proper dimension drawing is essential; otherwise, you don't know if what you ordered actually fits. A dimension drawing is an absolute MUST! - The included installation drawing is for a different faucet; although it says "For illustration purposes only", that doesn't make things any better. - On the two levers, the curves are on the left, on the spout on the right; this has no functional significance but looks bad. - The inlet hoses are very short at 38 cm. Overall, the quality is okay, but the design is poorly thought out and usable documentation is missing.
